In Hot Water Heat & Power, Inc.

Location

PEX in Slab?

Concrete Overpour

Staple-Up

Heat Transmission Plates

Number of Zones Desired

Bsmt Floor

Main Floor

Upper Floor

About In Hot Water Past Projects In The Media Awards Testimonials Careers With Us

Solar Power Wind Power Net Metering Calculate Your Energy Use Micro Hydro Power

Primer On Panels SunStation for
Domestic Hot Water Swimming Pool Heat Solar Radiant Heat Commercial

About Radiant Heat Munch-Kit Vito-System Solar Radiant Heat Energy-Efficient Homes Pricing

Energy-Efficient Homes

Pricing

DEFINITION OF TERMS

PEX IN SLAB:
A PEX plastic tubing embedded in the concrete floor of your home. Usually installed at the time of your home's construction.

CONCRETE OVERPOOR :
The PEX hose is attached to the existing floor. Then a lightweight concrete product is poured over the top. It can be used on main and upper floors.

STAPLE-UP :
The PEX hose is tacked up under the floorboards (between the joists) of the room to be heated. Then an insulation product is used to direct the heat upward. The floor-
boards must be accessible from the room below in order to install this system.

HEAT-TRANSMISSION PLATES :
A high quality insul- ation plate used in the staple-up application. Increases heat transmission by 40%.

ZONES:
Divisions of your home in which you would like to control the temperature separately.
One Zone =
One Thermostat

Home > Home Heating > Pricing > Price Estimate

MUNCH-KIT OR VITOSYSTEM QUOTE ESTIMATE

In order to give you an accurate estimate, we need to know a little about your project. If you're unsure about the meaning of a given word, see the definitions to the left.

PLEASE NOTE: Your information is kept private and will not be given to third-parties. The information you provide will only be used to estimate a quote for your project. (See also - Privacy Policy)

DIRECTIONS FOR THIS FORM

For a Munch-Kit quote, the most vital information is square footage and number of zones. However, it also helps us determine the amount of PEX if we know how it will be installed (see definitions to the left). Don't worry if you can't fill in everything. If you need help filling this form out, please don't hesitate to contact us at 1-888-745-2009 or email us with any questions.

PRINT A COPY:
If you'd prefer to print a copy of the form and fax or mail it to us, you can download the PDF version HERE

We cannot respond to email address at AOL. It is a limit enforced by our network system. Our apologies for any inconvenience this may cause.

* = REQUIRED

Name*
Email Address*
Telephone*
Fax
Type of Construction:
Building Location/Address

THE FOLLOWING SECTIONS ARE REQUIRED

IMPORTANT: In order to purchase a radiant system from us, you must have a minimum height of 96" in your mechanical room. While the middle of the holes of the bracket goes at 78", when you put on the venting (vent adapter, elbow, etc.), the minimum height must be 96".

What is the birds eye dimensions of your mechanical room?*
What is the height from floor to the lowest part of the ceiling in your mechanical room?*
What are other items in the mechanical room taking up space?*

Domestic hot water (indirect tank heated by Munchkin)?*	Yes No
If so,what size is the tank?
What is your average winter time heating bill to the nearest $10.00?*
Winter Temperature Lows:*
Elevation:*
Propane or Natural Gas?*	Propane Natural Gas
Building Construction Type:*
Jetted Tub?*	Yes No
If so, # of Gallons:
Number of Baths:*
Persons in the home:*
Can we provide a quote for solar domestic hot water addition?*	Yes No

Questions, Comments, or Additional Information :

If you need help filling this form out, please don't hesitate to contact us at 1-888-745-2009

Project Gallery \| News Archives \| Support & FAQs \| Partners \| Terms of Use \| Privacy Policy